Intermol 222 is a water-based release agent developed specifically for fast-cycle injection machines. It is diluted with water at approximately 1:20. It delivers clean, uniform surfaces and minimizes mold residues.
Die-casting
Requires dilution
Low residue
Specific Density: 1.0
Shelf life: 12 months
Base: Water
Color: White
Temperature Range: 100°C to 400°C
Release agent for Zamak.
Aluminum die-casting separator.
Zinc alloy release agent.
Release agent for non-ferrous metals.
Precision metal part release.
Shake the product before use.
Spray the parts from a distance of approximately 20 to 25 cm.
It is recommended to cure the mold by applying the release agent three times before producing the first part. Once the mold has been sealed (cured), apply only one layer of release agent when needed.
Do not overapply. Excess release agent does not improve the release effect; on the contrary, it may stain the part.
Do not expose to low temperatures, as this breaks the emulsion and renders the product unusable.
R 2022.07.01
These technical characteristics are typical of those obtained within the tolerance of normal production and do not constitute a specification. Our R&D team is constantly improving our products. Therefore, Interlub S.A. de C.V. reserves the right to change the technical information in this document without prior notice.
Cleaners
© Intermol, Interlub, Interglass, Interlub Group. All rights reserved.
Privacy policy
Cookie usage policy
English
Spanish