Intermol Cleaner AT8 is used to remove the hardened layer of resin and release agent that forms on the surface of the mold. It is recommended for manufacturing processes of headliners (thermal-acoustic insulations) made from polyurethane, phenolic, or epoxy resin.
Solvent-based
Superior surface quality
Headliners
Specific Density: 0.8
Shelf life: 6 months
Base: Solvent
Color: Clear
Temperature Range: Room Temperature
Enables fast and effective mold cleaning using a minimal amount of cleaner.
Prevents downtime due to mold maintenance.
Ensures parts with high surface quality.
Reduces product rejections due to quality issues.
Use personal protective equipment (latex gloves, safety goggles, face mask).
Shake the product before use.
Wait 5-10 minutes for the cleaner to take effect. Clean the residue with a wire brush, and finally wipe the surface with a damp cloth to remove any remaining cleaner.
Moisten a cloth or sponge and apply evenly over the surface of the part without excess.
Always use personal protective equipment.
Wear latex gloves and avoid direct skin contact with the cleaner.
R 2022.07.01
These technical characteristics are typical of those obtained within the tolerance of normal production and do not constitute a specification. Our R&D team is constantly improving our products. Therefore, Interlub S.A. de C.V. reserves the right to change the technical information in this document without prior notice.
Cleaners
© Intermol, Interlub, Interglass, Interlub Group. All rights reserved.
Privacy policy
Cookie usage policy
English
Spanish